1. Home
  2. Forums
  3. Report post

Report this forum post

Hello, We have a crown WAV with 4000 hours that has had issues with going down at the controls over the last 1000 hours or so. It has gotten to the point where it doesnt work 90% of the time. We can use the platform switch to lower it down without issue.

The WAV shows 1 battery bar level at all times even after a overnight charge. We have also put batteries from our other wav in it and that did not change anything.

It does not show any fault codes
  • Posted 28 Jul 2021 09:46
  • By Spencer_Apland
  • joined 28 Jul'21 - 1 message
  • Oregon, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.
Your Focus
Ellie Gabel
When warehouses go dark: protecting connected material handling operations from cyber threats
Ellie Gabel
Read blog
Read more Your Focus blog articles
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.

PREMIUM business

Flexi® By Narrow Aisle Limited
Leading manufacturers of very narrow aisle (VNA) equipment.
Flexi® By Narrow Aisle Limited
Last Week's Most Read
edition #1246 - 4 September 2025
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.