Hello friends. I currently have a Crown wp2300 forklift that will not charge and will not turn on. The cables are good and i can trace voltage all throughout the main power circuits from the battery itself to the 125 AMP fuse and even to the controller posts (controller is a new reman as well). when i plug it in to charge nothing happens and no LED's illuminate. i noticed i do have an hour meter display only. has anyone even had an issue with the onboard charging unit since its own wiring is tied into the system most importantly the key switch itself. i was wondering if the onboard charger can cause a complete inop of the unit?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.