Hi to all.
All begun with the truck shutting down 1 or 2 seconds after key on. Costumer calls and found the positive battery connection loose ( easy fix i thought)!
Repaired the connection and then codes AD-5,AD-6 and sometimes CB-2 were showing up. No hidraulics, no steering, traction OK. Checked fuses,all OK, measured wires between connectors CN111,CN103,junction CN231/CN234, all seems OK. Disconnected all 4 connectors in Main Controller just to clean the dust but after that when i plug the battery ON,it shows the code F1-1 and F1-2 immediately!
Now,could the bad connection of the battery blowed the main controller although the 10A fuse being Ok?
Grateful for any opinion,thanks.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.