Report this forum post

By your description you are saying the LED 1 flashes 15 times, then LED's 3 and 5 flash once?
This could possibly be this problem:
Battery Testing Error - Sulphate / Discharged: This error is only generated by one of two conditions found during the Pre-Qualification-Test Charge Stage: o Sulphate: Severely Sulphate battery plates are preventing a charge flow from increasing above a minimum value. Disconnect and reconnect AC Power to charger to restart this stage. If a second attempt failed, load test each battery and replace any failed battery. o Discharged: A severely discharged battery did not charge up to 1.75Vdc per cell ( for example - 21Vdc for 24V-battery ), within an allotted time span of approximately 4 to 8 hours. Check for heavy loads preventing battery from increasing charge and/or defective batteries that will not accept a charge.
  • Posted 10 Apr 2020 01:04
  • By swoop223
  • joined 23 Mar'12 - 3,692 messages
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
According to studies published in the English Journal of Medicine, the impact of daylight savings is revealed by a 24% increase in heart attacks on the Monday following the spring shift forward. When clocks move back in autumn, heart attacks drop by about 21%, suggesting that loss of sleep is an important driver.
Editorial calendar - planned features
CONSTRUCTION FORKLIFTS
HANDLING GOODS IN THE COLD
LOADING/UNLOADING FREIGHT
BROWNFIELD AUTOMATION
FORKLIFT ATTACHMENTS
BATTERY AFFORDABILITY AND LIFETIME
FORKLIFT SAFETY