Hi, new to forum, I've run into a brick wall.
I'm Working on a J 40 XNT with a steering issue. It's steers fully to the right, but not to the left. Disassembled the steering head and found it had some major wear in the gears, so all parts were replaced. Still not steering fully to the left.
Tested the steering control unit and the pressures were about 100 psi above normal(1100psi +-25 psi) so that was replaced.
Still not steering fully left.
I Need help trying to figure this one out, all hydraulics work ok.
Thanks,
Ralph
PS. The actual model is a J40XNT, not XMT, but I could not find that listed.