Report this forum post

I have a 7FGU15 Toyota with a 4-Y and the Assian l/p gas in the shop it came in with high emission levels after inspecting unit found the radiator tank was split and it had ran hot the head could not be resurfaced installed new head tstat and other cooling parts tuned up engine cap rotor plugs and wires replaced the l/p gas regulator as it was full of the odder producing oil

My problem is it runs very well at throttle but runs very rough at idle and I can not get any adjustment on the l/p gas regulator I mean the adjustment screw can be turned in any direction but it does not effect the running at these adjustments are usually very sensitive also replaced the vacuum sensor and the carburetor I have not replaced the l/p injector in the carburetor oh yea I can clamp off the vacuum line coming from the l/p gas injector and the other vacuum line that comes out of the case resonator and it idles fine

Any help would be greatly appreciated
  • Posted 27 Feb 2019 05:11
  • By TIMBO
  • joined 7 Jun'11 - 19 messages
  • Georgia, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Crown Equipment celebrates 80 years New Bremen, OH, United States
Upcoming industry events …
July 9-10, 2025 - Birmingham, United Kingdom
October 21-23, 2025 - Panama City, Panama
Crown Equipment celebrates 80 years New Bremen, OH, United States
Latest job alerts …
Evansville, IN, United States
Uxbridge, Canada
St. Louis, MO, United States
Daleville, IN, United States
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Global Industry News
edition #1236 - 26 June 2025
As June comes to a close, the month when our sector recognises National Forklift Safety Day , the United Kingdom’s Association of Industrial Truck Trainers (AITT) has issued a timely reminder of the need to ensure any staff training is fully accredited... Continue reading