No, it has Crown Access 1/2/3 system. No handset required, which is good. check your email. Regards 412, there are two encoders per drive motor. One is connected to Access 4 in the platform, one to Access 2/3 in the base. The access units talk to each other over CAN and compare the encoder readings, any variation and unit stops. Unfortunately there is an issue with WAV60 mast cables, there is a bulletin available regarding the issue (cable cores break or go high resistance). Have had probably 10 WAV60's with this issue and encoder count mismatch or other CAN issues. Some with less than 100hrs use.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.