1. Home
  2. Forums
  3. Report post

Report this forum post

Issues with a p22 code. I've cleared all codes and changed out switch already. Changed out both forward and reverse shift solenoids. Removed the vcm and cleaned connections. And even switched vcm from a perfect running machine to test and have same issue. When driving in foward machine will drop into neutral or when reversing machine will not go back in forward motion. Will go back into neutral. It's costing a lot of my time and can not figure this out! Please any input

Mcplo2a25lv
Cplo2-9p1347
  • Posted 4 May 2018 23:29
  • By Charlie1982
  • joined 4 May'18 - 4 messages
  • Texas, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.
TCM FD115-3
TCM FD115-3 2006
Yokohama, Japan
Used - Sale
Toplift Ferrari TFC36-48
Toplift Ferrari TFC36-48 2021
Stoney Creek, Ontario, Canada
Used - Sale
USD1
|
Latest job alerts …
Road Service Technician
Danville, IL, United States
View more jobs alerts

PREMIUM business

VETTER Industrie GmbH
The world's most comprehensive range of forks and the most intelligent sensor fork for more safety and efficiency.
VETTER Industrie GmbH
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.

Showcased in the Virtual Expo

XQ360 with SLAMXQ by Collective Intelligence Group
XQ360 with SLAMXQ
Collective Intelligence Group
Visit the Expo
From the forum discussions …
"D203 and D206 codes for a Linde H35D - Thankyou Gold Award Tech John_Bradley: Remove plug from display clean and put dielectric grease on it and reinstall. Look for..."
John_Bradley, United States
Read & Post in our Forums
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.