Report this forum post

Busy day with other projects as well. Thanks for the updates. I was able to change mode with the horn, key method. I made sure the batteries are charged and in good condition. I get a 24 volt reading from battery connector at both points. Key switch circuit seems good and I cleaned the contacts at the connector. Not sure why I get the 3 beeps. Is there another point that may need attention?
  • Posted 7 Mar 2018 08:33
  • By DannO
  • joined 6 Mar'18 - 3 messages
  • Wisconsin, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The word "okay" (or its abbreviation "OK") originated as a humorous misspelling. In the 1830s, a fad in Boston involved using abbreviations of intentionally misspelled phrases. "OK" stood for "oll korrect," a playful mispronunciation of "all correct".

PREMIUM business

RAEDER-VOGEL
Innovative high-quality wheels and castors for the forklift industry.
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA
Latest job alerts …
Tampa, United States
Dallas, TX or Lexington, KY, United States
Marietta, United States
Tampa/Orlando Florida, United States
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA