ok I am no machenic by any stretch of the imagination but I have a Caterpillar T30 that has been down for a while. It wont start. I have replaced the coil with the ignition module, the distributor cap and rotor. I have tested for spark andI have it from the coil to the distibutor cap but nothing out to the plugs. I checked the distibutor it is turning. Then just this morning (3/5/18) I tested the cable to the pick up coil with a meter. I looks good. Then I tested the pick up coil (956 ohms) then tested it with cable (956 ohms) any help would be greatly appreciatted