1. Home
  2. Forums
  3. Report post

Report this forum post

Never saw that code. It doe not show up in the diagnostic manual. I would replace the sensor and see if it goes away.
  • Posted 13 Oct 2017 07:59
  • By BREWSKI
  • joined 10 Jan'12 - 1,699 messages
  • Nebraska, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Your Focus
Carlos Mendes
Custom or standard? Choosing the right relay for the job
Carlos Mendes
Read blog
From the forum discussions …
"Unicarriers - it would have to be for a dual fuel unit also. Usually a bad cam or crankshaft sensor will throw a E-27 or a E-28 code on the dash panel... If it does not light up and the bulb is bad then it will not start also."
mwjago, United States
Read & Post in our Forums
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
From the forum discussions …
"Unicarriers - it would have to be for a dual fuel unit also. Usually a bad cam or crankshaft sensor will throw a E-27 or a E-28 code on the dash panel... If it does not light up and the bulb is bad then it will not start also."
mwjago, United States
Read & Post in our Forums
Your Focus
Carlos Mendes
Custom or standard? Choosing the right relay for the job
Carlos Mendes
Read blog
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
Crown Equipment celebrates 80 years New Bremen, OH, United States
Your Focus
Carlos Mendes
Custom or standard? Choosing the right relay for the job
Carlos Mendes
Read blog
Global Industry News
edition #1236 - 26 June 2025
As June comes to a close, the month when our sector recognises National Forklift Safety Day , the United Kingdom’s Association of Industrial Truck Trainers (AITT) has issued a timely reminder of the need to ensure any staff training is fully accredited... Continue reading
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ