1. Home
  2. Forums
  3. Report post

Report this forum post

I have a Hyster H50FT (L177) that is running rich/low power. Code 522630-2. When I monitor the oxygen sensor through the dash, the voltage remains high (.88V) at idle. The oxygen sensor does react as designed when using the accelerator. The unit has a 2.4L GM engine. I am wondering what the fuel pressure should be on this unit. It is a multiport system. Any thoughts anyone has would be great. This one has me stumped. Thanks
  • Posted 15 Sep 2017 00:10
  • By Likwid13
  • joined 17 Jul'15 - 14 messages
  • Alberta, Canada

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.

Showcased in the Virtual Expo

Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.