orange blink code on access3 traction controler - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
orange blink code on access3 traction controler

Crown ESR4500

Hi, the model of this machine is esr4000 serial 8a102xxx. the dash display is blank, the line contactors do not close, the the blink sequence is 1blink pause 3 blink pause 9 blink pause 4 blink then the sequence repeats.anyone know meaning of this code, also if the dash display is not working will the truck still operate. Thanks.

Posted 6 Oct 2024 07:09
By stephen_dwyer
joined 14 Jun'22 - 12 messages
Florida, United States

still learning

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Did you recently replace a module? Otherwise listen for the beep from the access1 display when you turn the truck on, if there is no beep then the truck won't operate.

The only time I've seen this is when a new module has been installed but the correct software is not installed. But it definitely sounds like an issue with your access 1 if it is not starting. I'd verify all the wiring and check the can circuit first.

Posted 6 Oct 2024 10:24
By DyslexicNerd_01
joined 13 Jun'23 - 225 messages
Wisconsin, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.