Hi guys, I have a Little linde Electric, sometimes it Works sometime I have 3-4 codes wich is T226, T227, T262 and sometimes T249.
I Found the traction motor fan was burn and Lac fan too, I though IT was over heating but no it still code, câble look fine.
You think the Lac is dead can I Do something to be sûre it is
Showing items 1 - 2 of 2 results.
I need advice on Code Error T262. how to clear or repair this code. I have checked CAN Hi CAN lo Resistance and voltage.
The codes on the Truck is T226,T227,T262,L226, L227.
any advise Please
Hi,
1) T226 =Motor temperature sensor is outside of the normal operating range of -39°C to 214°C
2) T227 = MOS temperature sensor is outside of the normal operating range of -39°C to 214°C
3) T262= CAN signal from LAC are not received
4) T249=Negative different signed ratiometric accelerator (1A4) signals 1 and 2 on Traction/Lift
(< -3[%])
=> First, you must replace the new cooling fan for the traction motor & LAC Power module.
=> Then put the truck back to operation then see if there are any error codes happen anymore?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.