Showing items 1 - 6 of 6 results.
Er reprogram can not connect with display, display also off with key on. Before swap everything works and truck goes on. VSM possible to download the hex package but dash not. Really strange
Pcst- programming-truck programming- er reprogram
If your asking for the steps in pcst
do you have experience with a Yale A955 electric truck ? I need info how about set a new VSM or Display with PC tool Yale i have.
Regards
replace the temp sensor in cooling systeem. If you can measure the temperature of cooland with external measurement and it is not overheat the sensor give bad info. Easyer look in service diagnose wich temperature sensor give to ecm.
Yes D204.
The fan goes to high speed as soon as start the truck. Also the temp gage says it will be hot which in fact it is not.
You mean a D 204 code , T204 or L204 are different errors.
D204 say engine to hot. Check cooling fan behind engine rotate max speed. It is electric fan and pulsed controlled by the ECM module Linde. If not rotate at max speed ECM defective
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.