Clark GCX15E:
master cylinder

Any help in information on bleeding a master cylinder would be appreciated. I know how to bleed the brakes at the wheel, but I assume this is different.
  • Posted 26 Sep 2016 01:07
  • Discussion started by jeffg95
  • Tennessee, United States
Showing items 1 - 2 of 2 results.
thanks for the reply, I will try that next time. we got this one to work by drilling a small hole in the reservoir cap and blowing 20# of air through the system from the cap down. We bled one wheel at a time.
  • Posted 28 Sep 2016 11:51
  • Reply by jeffg95
  • Tennessee, United States
Get a pump that will fit in a container of brake fluid. Open the bleeder at the wheel cylinder and connect hose from pump to bleeder. Pump and it will push the air up and out of the master cylinder to the fill reservoir.
  • Posted 26 Sep 2016 20:09
  • Reply by mrfixit
  • New York, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Toyota 02-8FD30
Yokohama, Japan
Used - Sale
Hangcha 80XENS
Flesherton, Ontario, Canada
New - Sale

Showcased in the Virtual Expo

Fact of the week
On average, people read 10-30% slower from a screen than from paper.