Our warehouse guys left the lift truck in the yard (and the rain) all holiday week and we've lost reverse drive.
Two contactors engage when commanded and (in forward) its working fine, but nothing in reverse.
36v
Showing items 1 - 4 of 4 results.
Interesting. I'll dig into it on Tuesday and let you know/see what I find.
Reverse came back on a intermittent basis - but real iffy.
Thanks
Even if you get it to work, your problems will come back. Take the control card out and remove the circuit board. Any residual dirt needs cleaned off. Usually at the open end of the card where the board is exposed, the board will rot
yep, that's the common wisdom.
what's weird though is that it kicked into reverse once it was fully charged and then quit again and never came back.
Thanks mrfixit
Try to dry it out the best you can. It may take a couple days.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.