has anyone come across this fault before ?
the unit will run fine for two to five minutes then the power to the lpg lockoff valve drops out and the charge light flashes. wait a few minutes and it will start up and drive as normal. even when the power to the valve drops out the engine still has spark and if you bypass the valve it will run but at 1/2 speed and charge light flashing.
thank you
Showing items 1 - 3 of 3 results.
Thanks mrforklift your right it was the controller but i ordered 1 & fitted it a service ex controller, I've only just seen your post,
Many thanks for your reply.
Yes I did
The fault was inside the computer. There is a fuel relay on the board and the solider breaks away. Quite easy to see and repair.
Hope this helps you as I racked my brains over this fault and was told by linde I need a new computer. The person who replied to my question was a great help and the forklift is still running.
Good luck :]
Hi did you find out what this problem was???
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.