Showing items 16 - 30 of 36 results.
I was today at truck and i tried I 5 and I 7 and doesn't work :)
Now i seen your last post... i'll try this week I+5+2.
Thanks a lot!
I checked today, its I 5 and 2 together, then put in batteryplug
The truck is an "sit on stacker" with the simple keyboard controller, i tried with I 5 but doesn't work...
I put 2 links with pictures with type of the truck truck:
https://cdn.nettikone.com/live/2020/01/20/ef5de84494a95a62-large.jpg
https://st.mascus.com/imagetilewm/product/f70df7d6/atlet-xjn-160-ergo,bab04bea.jpg
I5 is resetting for trucks you sit on and I7 is for the ones you have to stand or walk behind.
@John
I'll be at the truck tuesday and i will try!
@GUANAJUATO
There has to be an method to reset password or master reset..
Instead of I5 try I7, that will do the trick.
Hi you mention that some one had change the atlet service password, if you dont have that you might have replace the atc control, because you need the password for get into the atlet sevice to get into total reset then you can change any thing you want!
ATLET X160
SN: XJN226886/03
YEAR 2019
whats the model and serial?
After failed attempt and many other tries, i resume with same problem not solved.
I wonder that i remove the chip - battery (the 3V one) from somewhere, will work?
This equipament should not have many options and settings.
I think that the previous procedure with " I + 5 " would work at biggest truck's like "U" series witch have another keyboard controller (bigger and with more options).
Other options please?
Many advance regards!
Thanks a lot!
All the best!
That is correct, hold I 5 untill you see password menu.
Don,t worry, to hardreset TOTAL computer its different input combination.
Good luck
So i need to prees I + 5 and put battery connector to show that menu right? I ask you because Wednesday i'll be at the equiment.
Thank's a lot !!!!
I checked= Hold I5 and put in batteryconnector, hold I5 until you see password menu.
Parameters will not change.
Thank you, very much! I will follow!
Have a good week!
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.