Discussion:
Jungheinrich EFGDF16 burned! start to rebuild.

So I got an burned forklift, despide everybody else saiying this is a bad buy, I got it sub 1k euros, the batteries are on shape, all are above 1.996V despide havent charge for weeks, the point that cought fire was MP1514H, as this machine has been sitting outside for almost two decades (MY1999), I suspect it was the CAN 12VDC got short, well, that is just my guess, now I have a totaly destroyed MP1514H and wire harness to check up, I will check all wire connections to ensure that no short at motor, module and anywhere between.

I am trying to have a MP1514 on hand, and install JUDIT, to begin to test other two modules to make sure they survived the fire. I come from CNC machine repair sector, this is no more complicate than SIMODRIVE.

My plan is the desorder the destroyed MP1514H flash and read the firmware out (if possible, it seens survived from the fire) then find a similar MY card and burn back the firmware, can anybody please tell me how "smart" are the firmware to deal with different hardware revision of MP1514? or I have to find the exact hardware revision to accomplish this? what to watch out? thanks!
  • Posted 25 May 2023 05:12
  • Discussion started by Domingo_S
  • Spain
Showing items 1 - 1 of 1 results.
I think these have 3 controllers, one for lift, 2 for drive, drive ones are interchangeble, but produce error when miss data parity. I would source new used part. When looking for parts, controllers have also years ajd software differences, match them.
  • Posted 9 Jul 2023 01:48
  • Reply by Tanel_M
  • Estonia

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Movers & Shakers
Jospeh E Creed Jospeh E Creed
CEO, Caterpillar Inc
Secretary general, European Rental Association
Chairman of the Board of Directors, UgoWork
vice president, Investor Relations, Konecranes
Global Industry News
edition #1229 - 8 May 2025
In this week’s Forkliftaction News we look at the financial reports of some of the materials handling industry’s largest players including Hyster-Yale, KION and Hangcha... Continue reading
Upcoming industry events …
May 21-23, 2025 - Guangzhou, China
June 04-05, 2025 - Frankfurt, Germany
September 16-18, 2025 - Dar Es Salaam, Tanzania
Fact of the week
A 1904 lecture by scientist Elie Metchnikoff extolled the benefits of consuming yoghurt for halting the "intestinal putrefaction" which he believed causes aging. The press reported yoghurt as a cure for aging and the ensuing popularity is still with us today.