genie s-60 forward and reverse and articulate left or right inop - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
genie s-60 forward and reverse and articulate left or right inop

Genie S-60X

Ive got a genie s-60 not an (x) in the shop sn/ s6006-13295
unit has a new joystick for drive and steer.
attempted calibrating new joystick several times. i believe i completed it correctly. unit will start up and with the joystick pulled to 6 o clock (downward) the unit will move until you let off the joystick and function is gone. checked level sensor. not sure if thats my issue.
board inside of the platform box is throwing a 5-1 code which is drive joystick.
any information helps.
thanks so much

Posted 17 Aug 2022 03:44
By ANDREW_WORLEY
joined 20 Dec'19 - 6 messages
Oklahoma, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

* Joystick callibration:
1. Place the key on the upper control and unlock the emergency stops. (do not start)
2. Unplug the joystick you want to calibrate for 10sec.
3. Operate the joystick maximum and hold it for 5 sec. stretched out.
4. Operate the joystick for 1 sec. in rust.
5. Operate the joystick to the maximum in the other position, hold it for 5 sec. stretched out.
6. If the calibration is successful, a beep will sound.

sorry for the bad translation, hope it works

Posted 18 Aug 2022 18:29
By Forklift123
joined 11 Feb'21 - 39 messages
Netherlands

Mechanic of Forklifts, Aerial platforms & telehandlers in the Netherlands

Post a Reply Report this post

All info on Genie's is available free, online
. Service manuals, parts and tech tips.
WWW.Genielift.com

Posted 17 Aug 2022 13:12
By Bluenose
joined 2 Apr'14 - 31 messages
Nova Scotia, Canada

Take me as i come, cause i can't stay long....

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.