fault code 33029 - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster E50XM:
fault code 33029

displays an error VSM to Pump 33029

Posted 29 Apr 2016 01:48
Modified 29 Apr 2016 01:49 by poster
Discussion started by sebek_c
gliwice, Poland

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

A internal fault in the controller could cause this code also.

Posted 30 Apr 2016 03:45
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Thank you for your answer. The driver of the pump has been repaired. Is this an error that only about CAN line of controllers or controllers?

Posted 30 Apr 2016 02:24
Reply by sebek_c
gliwice, Poland

Post a Reply Report this post

This code indicates a loss of communication between the system manager and the pump controller through the canbus. check your connectors at the VSM and the hydraulic controller. The wires you need to check are the green/ yellow twisted pair. There could be a failure in one of the controllers also. If you are not familiar with checking the canbus loop in the truck you will probably need to get a copy of the diagnostic manual.

Posted 29 Apr 2016 22:35
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.