Hey Marc,
Hope you are in good health.
I request your help for the electrical / circuit diagrams for Komatsu 2.5 T Model FB 25EXF-5.
Would appreciate if you can help me as we have 6 equipments of the same model..
Also, would be great if you have the Service manual for the same.
The Toyota Manual provided by you is helping us to a great extent.
Awaiting revertal on the same.
code 5057: sensor R speed.
I'll get connect with TVH, thanks.
But how much does it cost, approximately?
Hello Dina,
I'm sorry to here that because I believe it is expencive.
Why don't you try TVH (Belgium), maybe they can repair the broken one?
Kind regards
Marc
Hi, Marc!
As expected we have to replace cargo
handling controller for forklift Komatsu FB18-12.
Controller serial # is 3C/V 3BA-48-71212.
Please advise me where can we find it?
Thanks,
Dina.
Hello Dina,
the error code 5057 on a FB-12 means that the pump motor speed sensor is defective.
1. Confirm that the connectors and terminals of pump motor
speed sensor are not disconnected and not loosened.
2. Measure the resistance of harness between the cargo handling
controller and the pump motor speed sensor.
Judging: Between CN1-P terminal No.27 (white) and
pump motor speed sensor terminal No.1 (white)
Between CN1-P terminal No.28 (black) and
pump motor speed sensor terminal No.2 (black)
3. Check the pump motor speed sensor. Repair or
replace it.
4. Check the gear of motor pump (poor mesh of gear
with the sensor, entry of magnetic substance).
Repair or replace the motor.
5. If normal in the above check, replace the cargo
handling controller.
Kind regards
Marc