Cat Lift Trucks (& Caterpillar) P36000:
error code

Don't have a service manual on this lift. Looking for description of error code F18 - potential causes & resolutions
  • Posted 24 Mar 2017 04:48
  • Discussion started by kathleen_h
  • Ohio, United States
Showing items 1 - 1 of 1 results.
F18 - ECU KWP2000 Communication Error

Situation: Indication "F18" flickering, Drive Operations disabled.

Possible Cause: Faulty ECU, faulty gateway, faulty harness.

How the error code is triggered: When the KWP2000 communication from ECU to gateway is interrupted.

Checks:
Check the continuity of KWP2000 communication cable.
1. Between 719 (gateway) and 719 (ECU)

If continuity replace gateway, if error remains replace ECU.

If no continuity replace harness.

If i'm not mistaken there is a box mounted to the front engine compartment plate behind the operator cab area that contains the gateway, ECU and VCM3-0P, the cable and connections to test should be in there.
  • Posted 24 Mar 2017 22:21
  • Reply by swoop223
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Fact of the week
Dublin's Sean O'Casey foot-bridge is a swinging bridge which opens to allow ship passage. It was unable to open for four years from 2010 because the hand-held remote control was lost. Finally a new remote was developed and the bridge opened again in 2014.
Tusk 500PGH16
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
Taylor TE650S
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
Fact of the week
Dublin's Sean O'Casey foot-bridge is a swinging bridge which opens to allow ship passage. It was unable to open for four years from 2010 because the hand-held remote control was lost. Finally a new remote was developed and the bridge opened again in 2014.