the store i work at has a fairly impressive fleet of lift trucks for a retail operation. the guys in unloading are tasked with routine maintenance and repairs. no one has been trained by the manufacturer or a 3rd party. any training was in house with possible support from c.o. by phone.
we have a yale electric walk-behind pallet jack in operation with the throttle and reverse.... switched.. this also affects the emergency stop button on the handle, between the throttles, which normally stops the machine from squishing the operator against a wall. it now does the opposite..
it now acts as a reverse, which would pin your *** instead of making it impossible to pin your ***.. management is aware of the issue. its not locked/tagged out. keys are still in it.
I wanted to tell the story cuz A: its kinda funny. B: i want to fix it before someone smashes a pelvis. C: i need to know if i need certification to repair it.. and i need to know where to look for a guide? il have a model # tomorrow.
id say where this is, but i'd be fired probly
Showing items 1 - 5 of 5 results.
Would it be as simple as the drive wheel assembly is turned around a 1/2 turn. I have seen this happen when repairs have been botched. Not on a Yale but many of these pallet movers are pretty similar. If this was the case the steering settings would probably need to be calibrated.
He told the story because "it's kinda funny"- I don't understand people's humor sometimes. Hope his warped sense of humor didn't get him hurt. But- KARMA'S A B*TCH!
ehhh....
he hasn't responded back yet...
i hope he wasn't the recipient of bad luck and the evil machine got him :oO
if you have a dc powered truck (4 power cables to the drive motor), it may be as simple swapping 2 cables, but getting a model and serial number is very important for us to be able to give you the correct information.
When (not if) someone gets hurt from untrained people working on and driving the machine, your employer will be very bothered by the fines the government hits them with. Pallet trucks require operator training that includes instruction to not work on the machine unless properly trained, as per USC 1910.178 (the OSHA regulation that covers powered industrial truck operator training).
Sounds like a wire somewhere is in the wrong place.
Its either at the traction motor end OR up in the throttle housing, without knowing the truck details its difficult to say exactly.
You might find checking the traction motor wiring will reveal a wire in the wrong place IF they still have tags / numbers on.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.