EE and F4 code Fashing Shuts down - Technical Troubleshooting discussion in Forkliftaction's forums

Toyota 5FBCU25:
EE and F4 code Fashing Shuts down

I have checked 3 fuses and fuse wiring at dash,all look good.Also checked plugs and wiring on base of steering but have not removed display to check. Not sure if I am going in right direction. Thanks for any help.
Jason

Posted 1 Mar 2013 14:27
Discussion started by bkjay
Ohio, United States

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

E0 is a main material Handling code and f1 is a display code. I'm thinking for my problem that it a static problem knocing out the display.

Posted 21 Feb 2014 14:06
Reply by kerbi
Ontario, Canada

Post a Reply Report this post

I'm in the same boat. My codes came back after a month.Next I put in a refurb. card and display, now it has a EO and F1 code. So I'm about to blow my head off. Some please chime in If you can help.

Posted 21 Feb 2014 13:23
Modified 21 Feb 2014 13:24 by poster
Reply by bkjay
Ohio, United States

Post a Reply Report this post

I have the same problem
replaced the dash card unit ran good for a week both codes came back drives fine,

Posted 21 Feb 2014 12:45
Reply by kerbi
Ontario, Canada

Post a Reply Report this post

I replace the display card and it fixed the problem

Posted 5 Jun 2013 08:36
Reply by bkjay
Ohio, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.