Dear all Still Experts,
I have the canbus cable which use for connecting to the FMx reach truck (AC version - 2007) but I don't know if I can use it to connect to the Still Truck RX20-20 (Year 2007) or not ? Someone can help me.
Looking forwards to your advice
Thanks in advance
Regards
-------------------------
Nuna
Showing items 1 - 5 of 5 results.
Do i need to update software? or just replace inverter....
Hello, thanks, someone else said the same.... i'll replace left side converter and see if any better...
where do you find this info in steds?
Hello.
A38-40 Internaø process error inCPP. Configurarion error (parameters). impermissible CPP channelor output configured sevaral times. chek parameter.
A39-14 - FU2 communication error. SR cannot receive PDOs on time. Drive unit is locked, no drive function. most likely the MCU. Traction converter fore the left side.
Hope it helps.
I will ask here for help...
Also have RX 20-20. After a few minutes of working with it the forklift stops. Wont go any direction and also hydraulic wont work anymore. Has 2 errors:
A3914
A3840
Is it problem traction inverter?
Hi Nuna,
for diagnostics you need different cables for the Rx and FMx trucks. FMx uses dongle + cable and Rx uses canbox and two cables. The canbox is located within the diagnostic case and the dongle is a seperate unit - it connects to the laptop USB port.
Sorry, you have to spend some money....
Hope this info is of some help
Regards
J
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.