1. Home
2. Forums
3. Design & Engineering

Discussion:
Crown wp2335-45

crown walkie has no travel /no lift inspect fuses r ok- battery voltage 24.5 ok wiring ok but the control box has no led red light. What are the ways of testing the black box??

• Posted 30 Sep 2019 21:08
• Discussion started by JKPAINTER
• Ontario, Canada

Post a ReplyReport this post

Great ! electrotech do you have the zappi controller equipment for testing ?

• Posted 9 Oct 2019 04:28
• Reply by JKPAINTER
• Ontario, Canada

Post a Reply Report this post

hi jk test for box is plug in zapi handset if it doesn't display then controller is u/s also check metal strip connector from line contactor to controller is not broken

• Posted 7 Oct 2019 23:03
• Reply by electrotech
• Victoria, Australia

Reach for the sky

Post a Reply Report this post

checked cables r ok any test to the control box ?

• Posted 7 Oct 2019 00:45
• Reply by JKPAINTER
• Ontario, Canada

Post a Reply Report this post

hi jk make sure dc plug terminals not broken pull cables on plugs they tend to break at the plug but appear to be intact when you look at them

• Posted 3 Oct 2019 21:04
• Reply by electrotech
• Victoria, Australia

Reach for the sky

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.