1. Home
2. Forums
3. Technical Troubleshooting
4. Crown
5. RR5200

Crown RR5200:
CROWN Getting error 418

Guys:
I have a RR5200 giving us an error 418.. Any idea??

• Posted 10 Mar 2015 03:22
• Discussion started by gabriel_g
• Florida, United States

Post a ReplyReport this post

Thanks Techno.....I tested all points and ohms metering are good....Definitively I need to replace the TDM..Thanks a lot...

• Posted 12 Mar 2015 00:50
• Reply by gabriel_g
• Florida, United States

Post a Reply Report this post

TDM CAN communication failure

Check for 60 ohms at each end of harness:

TDM
CA414-13 v-comm
CA414-12 CAN term
CA414-11 CAN H
CA414-10 CAN L

Access 3
CA403-10 V-comm
CA403-1 V-comm (I suspect this should be CAN TERM & manual is incorrect)
CA403-9 CAN H
CA403-2 CAN L

Check continuity of CAN lines, plug to plug

If all good, renew TDM

• Posted 11 Mar 2015 08:40
• Reply by techno_nz
• Canterbury, New Zealand

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.