CROWN 30RCTT-S SERIAL H-7007 - Design & Engineering discussion in Forkliftaction's forums

Discussion:
CROWN 30RCTT-S SERIAL H-7007

THIS UNIT HAS AN EV-1 SYSTEM. with out load truck runs just fine when wheels touch the ground it acts like the brakes are lock up and the motors pulse back and forth. Components changed already ev-1 card rec #2, compasitor, rec 23 and both snubb filters and potenometer still same problem. Has anyone came across this problem and what was the fix?

Posted 19 May 2009 11:42
Discussion started by ben_g
California, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

HI justinm. wheel cylindars for brakes battery ok truck does have shorts. found pump motor grounding to frame changed motor still no difference. went through power cables to motors and control panel everything checks out. I did change the duel motor card due to the card being damaged. I only have problems when load is put on truck battery volts only drop to 34.9

Posted 20 May 2009 09:54
Reply by ben_g
California, United States

Post a Reply Report this post

does it have hydraulic brakes?

hows the battery?
hook up a voltmeter and watch the volts as you accelerate

check for shorts to frame
look for loose or dirty connections (on the motor and battery cables)

is it doing something like this?
youtube DOT com/watch?v=t6SMQIF4_UY

Posted 19 May 2009 12:33
Modified 19 May 2009 12:35 by poster
Reply by justinm
New York, United States

New York, New York its a heluva town..you know that The Bronx is up..and I'm Brooklyn down

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.