we have a H80ft serial F564225 in our shop. when you put it in reverse it dies and throws this code. can anybody help us out.
Code 524223-0
Doug
Showing items 1 - 8 of 8 results.
Check for voltage at connector. Turn power off and unplug connector, turn power on and check for 5VDC. If not then use battery ground and test for voltage....if you get voltage then it has an open ground. Do you have technition access to the VSM....if so what does the XMSN pressures read...
replace both direction proportional valves they work together and need replaced in pairs
well we thought we had the forklift fixed but it is throwing the same code again. 524223-0. if anybody can shed some light on this code that would be great. I will see about getting my email on here.
Doug
offroad72.live.com
Offroad, you can add your e-mail address (properly formated) in your profile.
Dont use. use dot and instead of @ use at
my email is [email address removed]
you have a bad sensor, what is your email?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.