Raymond EASI OPC30TT:
Code 26 and FG

I am getting a code 26 at start up and a code FG right after. I have went through the book troubleshooting everything associated with these codes only to find that I have extremely high resistance on my static strap standoff and that I have inaccurate readings on the Q1 transistor...

Has anyone ran into these scenarios before?
  • Posted 3 Dec 2019 03:55
  • Modified 4 Dec 2019 08:28 by poster
  • Discussion started by Busch
  • United States
Never assume, assumptions are the mother of all ****ups. -Busch-
Showing items 1 - 2 of 2 results.
Hi Busch,

I assume you started with the basics ie. Battery status, Shorts to chassis, Brush/comm condition, Motor cables, Static strap in place, Horn not shorted, main fuses checked, Heat sink insulation doing its job and contactors checked. I'm basing this on a hard fault. Intermittent faults are tough.
Based on the Code FG, I assume your working on an Order Picker? Not sure if it's the new format on this website but I can't see any truck details.
My advice is to start with the above before jumping to any of the diagnosis in the manual.
Hope this helps,
Jay
  • Posted 4 Dec 2019 10:13
  • Reply by JayJ
  • Ontario, Canada
&*()_
  • Posted 4 Dec 2019 08:29
  • Reply by Busch
  • United States
Never assume, assumptions are the mother of all ****ups. -Busch-

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Fact of the week
On average, people read 10-30% slower from a screen than from paper.