CLARK OP 15 WON'T POWER UP - Technical Troubleshooting discussion in Forkliftaction's forums

Clark NOT SURE OLD:
CLARK OP 15 WON'T POWER UP

Hi, I have a Clark Order Picker Model OP15 that I want to buy that will not power up with a fully charged battery. Any ideas what it could be?

FYI, the battery pack shows 23.4 volts and 7.35 amps.

Thanks!

Posted 13 Jul 2010 01:40
Discussion started by mark_h
Texas, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Nope....this one is OP15-0064-PMI-9282. Thanks for the replies! I'm having the guy put a fresh charge on the battery and will check it out tomorrow afternoon. I'll check back after that with the results. Thanks again!

Posted 13 Jul 2010 05:30
Reply by mark_h
Texas, United States

Post a Reply Report this post

BTW...out of curiosity, the serial number wouldn't happen to be OP15-0351-PM9296 would it?

Posted 13 Jul 2010 05:14
Reply by joe_d
Texas, United States

Ain't nothing I can't fix but a broken heart and the break of day!

Post a Reply Report this post

This wouldn't be an old cable steer model would it? Does it have 2 buttons on the dash? Turn the key switch to on and push the top button. Also may have side gate switches. Make sure the gates are down.

Posted 13 Jul 2010 05:10
Reply by joe_d
Texas, United States

Ain't nothing I can't fix but a broken heart and the break of day!

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.