Discussion:
Caterpillar Forklift V300

Can any one help me with a load rating for a Caterpillar V300 forklift.
I need to know what the load rating is at 48" load center at 10 ft lift height.
  • Posted 23 Feb 2006 11:50
  • Discussion started by Greg
  • Queensland, Australia
Showing items 1 - 15 of 16 results.
hello,
plz i need manual for cat v900 old lift truck
best regards
email [email address removed]
whatsapp 00216-22264316
Thank you forktime for using our Forums but......

Forklift manuals are almost all considered "proprietary information". The only proper place to get them is from your local dealer who is the legal representative of the manufacturer. We all need to respect the intellectual property rights of the copyright holders.

Our Forum Readers can answer specific questions about particular concerns, and even quote small sections of the manuals (it's called "fair use" to intelligently discuss the particular concern), but cannot be seen as trying to get around the rights of the copyright holders (usually the manufacturer).

So please just describe your problem (without asking for a manual) and we are sure there are folks on the Forums here who can give you very well considered opinions about those concerns.
Best wishes
From
Forum Admin
  • Admin
  • Posted 17 Jun 2018 03:58
  • Modified 17 Jun 2018 03:59 by poster
  • Reply by Admin
  • Queensland, Australia
Contact me about any forum administration issues.
does anyone have a service manual for this forklift? that would like to share? Thank you
  • Posted 15 Jun 2018 23:39
  • Reply by forktime
  • Alberta, Canada
awsome thank you
  • Posted 1 Mar 2018 01:35
  • Modified 1 Mar 2018 01:48 by poster
  • Reply by billy_j
  • Texas, United States
any chance of getting a copy of the specs on the V300b??
it would really save my a$$.

cheers

Anthony.
  • Posted 27 Jul 2009 09:09
  • Reply by anthony_n
  • New South Wales, Australia
NEED A SET OF BRAKE DRUMS FOR MY V300B SERIAL: 72Y01492 TYPE D
  • Posted 25 Sep 2008 23:33
  • Reply by bill_g
  • Alabama, United States
TODAY IS GREAT, TOMORROW IS GOING TO BE EVEN BETTER!
THANKS
  • Posted 10 Sep 2008 01:08
  • Reply by bill_g
  • Alabama, United States
TODAY IS GREAT, TOMORROW IS GOING TO BE EVEN BETTER!
Glad we could assist
  • Posted 18 Mar 2006 06:07
  • Reply by daniel_g
  • Flevoland, Netherlands
Daniel

Received email today, I have got to say thanks very much, I have been trying to obtain this info through the normal channels since November last.

Thats a beer I owe you.

Cheers

Greg
  • Posted 25 Feb 2006 12:37
  • Reply by Greg
  • Queensland, Australia
Thanks Admin.

Greg e-mail should be with you now.
  • Posted 24 Feb 2006 23:43
  • Modified 18 Mar 2006 06:06 by poster
  • Reply by daniel_g
  • Flevoland, Netherlands
No problems - i have sent you an email
  • Admin
  • Posted 24 Feb 2006 21:05
  • Reply by Admin
  • Queensland, Australia
Contact me about any forum administration issues.
It could well be Ron.

Admin any chance of assisting with the removed e-mail address of Greg?
  • Posted 24 Feb 2006 20:05
  • Reply by daniel_g
  • Flevoland, Netherlands
Daniel...I got the info from Jerry over in CSM. He has some old charts. He was going by model V300, not a V330B/C....I suppose that's the diff....Ron
  • Posted 24 Feb 2006 09:47
  • Reply by schex
  • Texas, United States
Daniel, Thanks for the info. The machine in question is a V300B fitted with a 230" mast.The machine will only ever lift to a height of 10" (2 high container stacking) If you could e-mail the spec sheet me @ [email address removed] it would be great, Thank for your help.
  • Posted 24 Feb 2006 09:35
  • Reply by Greg
  • Queensland, Australia
Ron I take it that is you? Its Daniel at MCFE here. Where did you get your figures from because they differ to those which I have in the spec sheet.

Greg it depends on which model series you have...

V330B with LC at 48" = 19500 lbs
V330C with LC at 48" = 20900 lbs

These are taken directly from our old specification sheets and is applicable upto a lift height of 218" (18ft).

I would recommend that to ensure you have every base covered that you contact a local Cat Lift Trucks dealer to confirm every aspect of the machine to double check the capacity.

If you post your e-mail address and actual model I can probably e-mail part of the spec sheet.
  • Posted 24 Feb 2006 01:51
  • Modified 24 Feb 2006 02:08 by poster
  • Reply by daniel_g
  • Flevoland, Netherlands

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Oshkosh, WI, United States Oshkosh Corporation recorded a sales drop of 6.5% in the second quarter, attributed to a decline in Defense segment sales and lower sales volume in the Fire & Emergency segment...
Aschaffenburg, Germany Linde Material Handling has unveiled a new heavy-duty mast which is being to fitted to its R14 HD to R25 reach trucks for payloads of 1.4 to 2.5 T...

Latest Jobs

Richmond Hill, Canada
Covington, Georgia, United States
Philadelphia, Mississippi, United States
Louisville, Mississippi, United States

Movers & Shakers

senior vice president
PEAC Solutions , United States
vice president of global procurement and supply chain
JLG Industries, United States
vice president of sales
ePicker, United States
chief operating officer
Clark Material Handling Company, United States

Latest Jobs

Covington, Georgia, United States
Richmond Hill, Canada
Miami, United States
Louisville, Mississippi, United States
Aschaffenburg, Germany Linde Material Handling has unveiled a new heavy-duty mast which is being to fitted to its R14 HD to R25 reach trucks for payloads of 1.4 to 2.5 T...
Washington, DC, United States Clark Material Handling has departed US industry group The Industrial Truck Association (ITA), which claims to represent “90% of the forklift manufacturers in the United States and Canada”.  The...

Movers & Shakers

senior vice president
PEAC Solutions , United States
vice president of global procurement and supply chain
JLG Industries, United States
vice president of sales
ePicker, United States
chief operating officer
Clark Material Handling Company, United States
Aschaffenburg, Germany Linde Material Handling has unveiled a new heavy-duty mast which is being to fitted to its R14 HD to R25 reach trucks for payloads of 1.4 to 2.5 T...
Fulda, Germany While other manufacturers are struggling with blowouts of delivery schedules, Hubtex is promising ‘shorter delivery times’ as one of the benefits of the makeover of the MaxX multidirectional sideloader...

Latest Jobs

Miami, Florida, United States
Richmond Hill, Canada
Miami, United States
Louisville, Mississippi, United States

Movers & Shakers

senior vice president
PEAC Solutions , United States
vice president of global procurement and supply chain
JLG Industries, United States
vice president of sales
ePicker, United States
chief operating officer
Clark Material Handling Company, United States