I need the instructions on screen if you were so kind thanks, greetings
You don't need pc
Its all possible with display
Matching the truck thats all
The cpl print SAS you must replace it
Sometimes iss all defect hhmm
when you need instruction of display let me now
John.
There was a short in the motor's steering I ride with new brushes, also I have changed the mosfeet (transistor) that was open, but still the same.
I think that will damage any of the two plates that bears next to the transistor, but not is which and would like to know if I am asking the replacement: not is if you do programming, I was stopped not knowing if I can change it without having to program anything only have PC to linde.
for toyota don't have, you cannot call and only mounted?
help
Thank you
hello you don't have steering F01 means
Ps Powersteering main circuit open
This is a AC truck but only the steering motor is A DC motor, the problem are the brusch of motor
When you change them and still got F01 You have problem wit SAS print Leftside of truck in the back There mounted transistor on it they blow away(defect) hopefull the print is okay,
Always check the brush of this type of truck
when you need more help let me no
Kindly regards
John.
Yes, it is.
Series 7 with AC Technology engines thanks
serial: 7FBMF-18-10300 model: 7FBMF16
ONLY the Sears motor is DC technology from DIRECION
Are you sure about the model?The 7series are AC technologie,motors are brushless.Can you confirm that model and serial number?Thanks.