HELP!!! I HAVE A YALE GLC070 THAT HAS CODE 524223-1. (FWD/REV PRESSURE LESS THAN COMMANDED) TRUCK MOVES ABOUT 5FT IN EITHER DIRECTIONS AND CODES OUT. I'VE CHECKED VOLTAGES ETC AT PRESSURE SWITCHES AND ALSO REPLACED PRESSURE SENSORS WITH NO LUCK. ALSO REMOVED SOLENOIDS AND CLEANED, STILL NOTHING. ANY HELP WOULD BE GREATLY APPRECIATED....
Showing items 16 - 22 of 22 results.
after attempting calibrate once again, calibration counted down to 0 and then codes out. afterwards having code 524276-1. can anyone tell me what this is. thanks in advance.
I'll check more on Monday. Will update with any info I find. Thanks aga in guys.
when the you calibrate and stops the proces normaly it gives a code
to point witch solenoid malfunction
check the speedsensor tiss and toss in diagnostic
Oil level is good. When attempting to calibrate through the dash it gets down to about 5 secs remaining and codes out. Which proportional solenoids are you talking about. This is the first one of these I've encountered. Thanks for the replies.
this is normally a sign that the prportional solenoids need replaced , or you are simply low on oil. check the level is good and calibrate the transmission. might cure it for now
It never goes over 4-5 psi in either direction. When you do manage to get it to travel it's pulls fine. No slipping.
check the pressure true the diagnostic in the dash
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.