I bought a Hyster YC-40 off craigslist for $800.00. It was starting and running just fine. I changed the Hydro Oil, Engine Oil, and Transmission Fluid. Now, it will crank but not turn over. This is extremely puzzeling? Any ideas?
Thanks in advance for your help!
Showing items 1 - 3 of 3 results.
i would check the battery and load test it to see if its ok,then check the starter,sounds like it is dragging or needs rebuilt/replaced. Do a voltage drop test from the battery to the solenoid and a drop test on the negative cables,check for good ground connection on negative cable from battery.
Yes it cranks and trys to turn over. If I hold down the gas pedal it almost makes it.
"it will crank but not turn over"?? Does it just make a click or does the starter turn the flywheel and just wont fire?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.