1. Home
2. Forums
3. Technical Troubleshooting
4. Toyota
5. 7HBW23

Toyota 7HBW23:
Code C157, C28

Please help fellow Forklift Gurus.....
This jack keeps throwin' these two codes, especially when making a tight turn.

Any ideas?
Thanks & have a spectacular day. We (Oklahoma) were just rated the HOTTEST state in the US for July. Geeez

• Posted 9 Aug 2011 23:54
• Discussion started by TheBirdman
• Oklahoma, United States

TG

Post a ReplyReport this post

i have the event code c28 but i don't have damages wires

• Posted 10 Jan 2012 05:42
• Reply by alonso_reyes
• kyku, France

montacargasmsi@gmail.com

Post a Reply Report this post

They just keep putting in the stuff. Good Luck.

• Posted 11 Aug 2011 11:54
• Reply by rogeriwt
• Massachusetts, United States

Post a Reply Report this post

Awesome! I will advise my tech. Years ago had an account with some Toy (raymond) reaches and yeppers...those thin wires in the handle killed me on a regular basis!
Thanks

• Posted 10 Aug 2011 23:13
• Reply by TheBirdman
• Oklahoma, United States

Post a Reply Report this post

That is usually the sign of a bad wiring harness. If you pull the allen bolt that holds the cover down at the bottom of the handle you will see the wire harness. Look carefully where it comes through the tiller assembly and I bet you will see exposed wires. Just did one 2 weeks ago with the same symptoms, @ 6 of the wires were rubbing and worn through thier covering.

Good luck.

• Posted 10 Aug 2011 08:16
• Reply by rogeriwt
• Massachusetts, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.