glow indicator - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster H40XMS:
glow indicator

We have an engine that revved at high rpms for no specific reason & also the glow plug indicator on the dash shines continuous. Could we have a faulty controller? It has a Mazda diesel engine.

Posted 8 Sep 2010 02:42
Discussion started by buckshot
Texas, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Under the air cleaner is this controller & another relay. The glow plug indicator light dims when thre relay clicks & then brightens when it clicks for the second time. Is the controller telling this relay to open & close but the circuit to the indicator light is not opening?

Posted 8 Sep 2010 03:47
Reply by buckshot
Texas, United States

Post a Reply Report this post

under the air filter hosing is the glowplug controller. it will be faulty and will probably burnt out the glowplugs. check that the throttle cable is free and not tight when pressing the pedal ,it could be seizing up

Posted 8 Sep 2010 03:00
Reply by grubbymits
scotland, United Kingdom

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.