Model Number is 5FBE15. I can hear the board click when I engage the lift, but nothing moves. Lift, tilt, and side shift are all in-op. P/S is hard as well, but is improving.
No other problems.
Showing items 1 - 13 of 13 results.
The only solution is to change the parameter of the pump with the function from the display
Sorry, thought I updated this.
Lift problem was stuck brushes.
P/S was computer reset.
If your contactor is coming in it maybe your hydraulic motor or cables going to the motor or problem with the contactor it self Thanks Rich
Found out my data tag is wrong, it is a 5FBC from Rick.
Where is the fuse I need to check?
jason at turf-aire dot com
Thanks
OK, we took another look at it, and next to the power steering pump where the 75 AMP is there is a button you can push in to activate the power steering pump. When we push that in the pumps kicks on and it freely steers, but once released the pump stops working.
Know you might be busy Rick, and I appreciate the help, but did you come up with anything?
I do not get any error codes when I turn the unit on, steer, or try to lift. Is there a special way to pull error codes off. I have seen E3 several time, but assume that is the deadman swith error.
serial # is 11184
No I do not hear the power steering energize, but I do not think I ever heard any noise when I turned.
When I try to use the lift all I get is the clicking. When it started going out it was quick. First it lift very slowly, and then stopped working.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.