Hyster B60Z Error Code - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Hyster B60Z Error Code

My Hyster B60Z Walkie Rider is showing error code 31. I changed out the controller as this was the disgnosis by our area Hyster dealer and still twoo beeps and code 31. HELP!!

Posted 25 Sep 2009 05:02
Discussion started by david_k
Connecticut, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

If this unit has a Curtis PMC (code 31) there is a problem with communication between the control handle (tiller handle) card and the PMC controller. The cable might be damaged? or the Tiller handle card might be bad( these are known to go bad ), don't have much problem with the PMC. If the cable is good and you want to change the tiller card be sure to ask for the Service Gram that goes along with it for programing. Curtis makes a handset for testing and programing the units, comes in very handy cost about $500.00.

Posted 26 Sep 2009 10:12
Reply by scott_j
North Carolina, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.