Code D156 - Technical Troubleshooting discussion in Forkliftaction's forums

Linde (& Baker) H30:
Code D156

We have no drive no hydraulics. We've checked a lot of basics. Fluid levels are good. Any ideas? Thanks in advance!

Posted 27 Sep 2022 05:44
Discussion started by Bill_Menchen
Nevada, United States

Bill Menchen

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

1. Connector (6X1) defective.
2. Connector (X15) defective.
3. Display unit defective.

Posted 27 Sep 2022 23:36
Reply by matt_s
kent, United Kingdom

Post a Reply Report this post

one of the canbus connected controllers not give message. Check fuse and voltage to each controller and display. In pc software you can check wich component not connect with pc. Possible a component activated in software but not connected in truck , LFM or something.

Posted 27 Sep 2022 21:59
Reply by tr_doctor
Netherlands

Regards

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.