1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Excessive fuel through system

Discussion:
Excessive fuel through system

Clark c500-s30 getting excessive fuel at carburetor. Believe it's vaporizer but need confirmation
  • Posted 19 Sep 2022 10:02
  • By William_Few
  • joined 19 Sep'22 - 3 messages
  • Kentucky, United States
William Few
Post a ReplyReport this post
Showing items 1 - 4 of 4 results.
If i remember it is 5 to 7 psi at the water jacket vaporizer
  • Posted 23 Sep 2022 02:26
  • By stillworkin
  • joined 2 Nov'18 - 96 messages
  • New York, United States
Post a ReplyReport this post
Thanks everybody for info. It was the vaporizer
  • Posted 20 Sep 2022 12:02
  • By William_Few
  • joined 19 Sep'22 - 3 messages
  • Kentucky, United States
William Few
Post a ReplyReport this post
Does the vaporizer go into the top water housing where the top hose goes if so it is a zenith vaporizer there is a allen screw at the top that is were you check the gas pressure it is around 8to 12psi any more and the vaporizer is bad also the carb could cause to blow gas through must check at vaporizer first hope this helps.
  • Posted 20 Sep 2022 11:59
  • By Scott_
  • joined 16 May'21 - 318 messages
  • Pennsylvania, United States
Scott
Post a ReplyReport this post
A specific vaporizer that goes on. must make 20 psi for it to run correctly. Waukesha engines only.
  • Posted 20 Sep 2022 05:17
  • By grant_c
  • joined 12 Aug'16 - 27 messages
  • Manitoba, Canada
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

PREMIUM business

REPOWERTEK Inc
PRIME battery regenerators: the only technology and product line-up worldwide that overcomes the technical limitations of battery regeneration.
REPOWERTEK Inc
From the forum discussions …
"Helfriwj from the US says: 'I am trying to locate the timing marks for a TCM FCG20N6'. Stefano from Italy was able to provide an image of the parts manual."
helfriwj, United States
Read & Post in our Forums
Fact of the week
Foundling hatches are safe, anonymous drop-off points for unwanted infants, allowing parents in crisis a way to surrender a baby safely without fear of punishment, ensuring the child is rescued and cared for. The concept started in the 12th century, was abandoned in the late 19th century, then reintroduced in 1952. It has since been adopted in many countries.
Toyota 02-2TD20
Toyota 02-2TD20 2019
Yokohama, Japan
Used - Sale
Taylor TX330S
Taylor TX330S 2013
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
USD159,500
|

PREMIUM business

REPOWERTEK Inc
PRIME battery regenerators: the only technology and product line-up worldwide that overcomes the technical limitations of battery regeneration.
REPOWERTEK Inc
Fact of the week
Foundling hatches are safe, anonymous drop-off points for unwanted infants, allowing parents in crisis a way to surrender a baby safely without fear of punishment, ensuring the child is rescued and cared for. The concept started in the 12th century, was abandoned in the late 19th century, then reintroduced in 1952. It has since been adopted in many countries.
Forklift Diaries
Read more Forklift Diaries blog articles
Global Industry News
edition #1260 - 11 December 2025
In this week’s Forkliftaction News we report on DHL Supply Chain signing a deal to deploy autonomous mobile robots (AMRs) at its Mexican retail operations and look at Guidance Automation’s successful trial of an AMR with a hydrogen fuel cell... Continue reading
Fact of the week
Foundling hatches are safe, anonymous drop-off points for unwanted infants, allowing parents in crisis a way to surrender a baby safely without fear of punishment, ensuring the child is rescued and cared for. The concept started in the 12th century, was abandoned in the late 19th century, then reintroduced in 1952. It has since been adopted in many countries.