hello everyone,

we bought a few above mentioned trucks, and there was a problem with them standing in the warehouse for a few years with no power, the date and clock wereall scrambeled , but i managed to fix that with can key, and setting the clock but on the one of them there is a problem with clock not running, ok, we fixed the timing chip in the MCU , and now the clock is running, but the parameter 1001 can't be writen, it always goes back to the 0 instead 2, so i have to connect it to the truckcom or is there a way to copy parameters from another CID or MCU from working truck? Because i tried to connect the CID from working truck and it didn't help, and now i have the error 2:004 on the working truck, so is it possible to do it without the truckcom? because i do have it installed , but i don't have the cables...
Regarding the cables i see that it is necessary to have a castor can cable and serial converter, i do have a Peak dongle from Still truck, and it fits to the truck, but it won't connect, is that a special cable or normal can protocol?I would like to get the information from someone working with BT , because i'm learning from the manual and internet and i'm not sure if i have the right information...

thanks in advance!