1. Home
2. Forums
3. Technical Troubleshooting
4. Crown
5. RR5700

Crown RR5700:
Cylinder issue

If it only does it at high speed then check the flow regulator valve in the bottom of the carriage cylinder. I've had many of them fail.

• Posted 11 Oct 2021 14:38
• Reply by 1CrownTech
• Washington, United States

1crowntechnician@gmail.com

Post a Reply Report this post

make sure the retaining clamp on the first stage cylinder has not been overtightened
make sure your secondary chains are adjusted correctly
adjust mast anti rattle grub screws, including 2 hidden ones at the bottom
ensure mast channels are clean and lightly greased

• Posted 9 Oct 2021 10:19
• Modified 9 Oct 2021 10:20 by poster
• Reply by crownie
• Victoria, Australia

Post a Reply Report this post

Do a complete reseal on the free lift cyl

• Posted 9 Oct 2021 07:47
• Reply by Triggs
• California, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.