Event Code 132 - Technical Troubleshooting discussion in Forkliftaction's forums

Crown PE4500:
Event Code 132

I have a PR4500 (I listed under the wrong model accidentally) with intermittent code 132. It is not listed in the service manual. It has a brand new main wiring harness, deadman/brake switch assembly, brake assembly and POT1 and F/R switches are calibrated and good. Raise and lower still work after it codes, but travel speed is slowed. Code will go away after rekey but comes back shortly after while traveling.

Posted 13 Aug 2020 02:34
Modified 13 Aug 2020 02:36 by poster
Discussion started by Amanda_Taylor
New York, United States

-Taylor

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

maybe check your load sensor, or pressure transducer. It could be bad or have trash in it making it think it's carrying too heavy of a load and slowing the speed.

Posted 14 Aug 2020 00:01
Reply by JMC1
Iowa, United States

Post a Reply Report this post

Newer lifts are requiring software updates now. Something to look into. Good luck.

Posted 13 Aug 2020 06:20
Reply by Alvino_Revilla
California, United States

Post a Reply Report this post

The deadman switch/wiring and the main wiring harness that it connects to are both brand new.

Posted 13 Aug 2020 04:57
Reply by Amanda_Taylor
New York, United States

-Taylor

Post a Reply Report this post

Sounds like maybe it could be related to the OP platform deadman switch? I would start by checking the wiring back to the switch under the platform.

Posted 13 Aug 2020 04:00
Reply by NoobTek
North Dakota, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.