When the unit came into the shop for a lower unit/motor replacement it drove but the brakes would lock and had to be readjusted. (Unit would start up normally and would operate) I believe that the problem is due to a faulty lower drive unit. Anyway I used a drive and motor from a unit that the customer is using for parts. After installing the drive/motor I readjusted the Encoder 2 to index. But when I power up and the unit goes thru test it throws a wrench and code 215 (NO LEFT TURN) I checked everything that I can think of. ie. K5, swapped out steer control mod, encoder 2. The drive will move about 10 degrees to right when the key is turned on and time out is reached. Normally the drive will move right to left before settling to index point. With encoder unplugged the motor moves right/left as normal but then throws code 208. Nothing changed from one drive to another but now I do not know what to do at this point. HELP Thanks Ed 443-463-0555
Showing items 1 - 2 of 2 results.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.