gents I have an intermittent fault on this Linde E50hd 388 trucks. every now and again it will code out T290.code resets with key cycling but I cant find any reference to the code meaning anywhere.its so intermittent , it will do it 3 times in 1 day then run for a week or so. I had a look at it to day with a laptop. could also see lots of steering mismatch faults , im thinking these are linked
Showing items 1 - 8 of 8 results.
I'm starting to think static is to blame here. T290 is defo on the display when the truck shuts down
sadly unable to do this as photography is not permitted in the area of work. would a steering fault cause this issue ??
Send display image to my email
Thanks for that. My code is logged in the traction control though you say it's a HYD fault
Current in auxiliary valve 3 too low
Thank you. I don't have a picture but details are.E50HL H2X388H00404.2017 machine
Send plate image to my email, I can help you
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.