Hi... all my friends.
please help, for the trouble I'm facing.
for the hydraulic function everything is dead or does not work, when the joystick is moved elevator error code L224 and if it is reached reach error code L225.
what I have done is check the pump motor, speed sensor, sensor temperature, cable and all ok. maybe there are friends who have had this problem we can share information. thank you
Showing items 1 - 11 of 11 results.
L 224
Fault description
Pump motor does not start/is stuck (number of revolutions < 50 rpm) although lifting joystick 2B1 is moved.
Note: See SI403/17
Conditions of occurence
---
Result
Indicator lamp: interlock warning !
Possible causes
Collision while lifting
Steps to eliminate the fault
---
225 Pump motor does not start/is stuck (number of revolutions < 50 rpm) although reach carriage joystick 2B2 is moved.
Note: See SI403/17
Sir
Good day
Model; R20hd-1
Nr, H21120Fo1851
Year: 2015
Sorry for 2014 wrong year model
Thank you and god bless
Noel Reyes
115 1120 type what is serial nr
R20hd-1 sir have error L224 and L 225
same senaryo
Hi... all
please please help
please help, for the trouble
the hydraulic function everything is dead or does not work, when the joystick is moved elevator error code L224 and if it is reached reach error code L225.
brand; linde reach truck
model; R20hd-1
year ;2014
terima kasih, semoga saya dapat menyelesaikan masalah ini
I've sent you the manual. But ultimately you need Linde service program to re -learn all parameters. I put an A2 controller in one, needed to calibrate everything before it would move. Some Linde's with intermittent issues were fixed by simply calibrating accelerator or height
Good luck with your battle on the R14!
124 Pump-motor does not speed up when Lift-/Reach-Joystick operated.
Note: See SI403/17
L 124
Fault description
Pump-motor does not speed up when Lift-/Reach-Joystick operated.
Note: See SI403/17
Conditions of occurence
---
Result
Indicator lamp: turtle slow speed
Disable all joystick inputs except lower
Possible causes
Collision while lifting (Resettable with neutral joystick)
Steps to eliminate the fault
Oh I feel you're pain. I feel that Linde lifts were built by Germans to get back at us for losing the war! I have an R16 reach manual from 2015, and can send to you. put your email in profile, I will send to you.
Good luck!
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.