yale NDR045EB Code error DTC XX107 - Technical Troubleshooting discussion in Forkliftaction's forums

Yale NDR045EB:
yale NDR045EB Code error DTC XX107

Good day technicians

I have a problem with a forklift YALE presents me with the error code 107 is quite constant, it does not let me operate the equipment correctly.

I restart it with power off and on, but within minutes the code appears and performs the revision of safe connectors in each controller.

They have some idea of this code.

regards

Posted 25 Jul 2018 02:35
Discussion started by henry_leiva
san salvador, El Salvador

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

That is a Can I/O module fault. The I/O module is mounted on the attachment on the back side of the carriage. You probably have some damaged wires. these wires run through the attachment over the mast and back to the master controller. Check the over the mast harness for damage.

Posted 27 Jul 2018 07:14
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.